Mack and Mabel: August 2015

Dog Gone Quilt by Sew Fresh Quilts

Tomorrow sees the start of the Dog Gone Cute Sew Along hosted by Lorna at Sew Fresh Quilts

Each week from 1st September onwards Lorna will share instructions on her blog for piecing the various dogs.

In October the Blog Hop starts and you can follow a whole host of bloggers, including me! and see what we've made

In November a link party will be available for you to share your blog, Instagram or Flickr photos of what you've made and there will be some awesome prizes to be won too!

There are two block sizes: Small finishing at 9" x 6" and Large finishing at 18" x 12"

There are two sizes of quilts: Mini 30" x 30" and Maxi 60" x 60".

You can make a something as small as a pouch or a full quilt.

Of course if you want to work at your own pace, you can purchase the pattern HERE

I know exactly what I'm going to make for the Blog Hop. It is something for this little guy that I looked after for my son and daughter-in-law this weekend.

I do hope you'll join us. It's going to be a lot of fun!

Today I'm talking a bit about my progress with the Farm Girl Vintage Quilt. The quilt is from this book by Lori Holt.

There is a quilt-along in progress which Lori hosts from her blog A Bee in my Bonnet

We are working systematically through the book making 2 blocks a week, either the 12" size or the 6" according to your preference. The Instagram hashtags are #farmgirlfridays and #farmgirlvintage.

I chose to join the quilt along and make the 6" blocks for one reason. I have until now been really bad at accuracy when working on a small scale like this! I wasn't sure at the start that it was my kind of quilt. I joined purely to improve my skills. It's worked and I just love the quilt now! A few years ago I started the Farmers Wife Sampler Quilt from the book by Laurie Aaron Hird. I made a few blocks, was disappointed by my lack of accuracy and they now sit languishing in a cupboard. I'm getting lots of practice at small scale at the moment. I'm also making the My Small World quilt by Jen Kingwell and I'm going to join the 1930s Farmers Wife QAL posted by VeryKerryBerry (and hopefully finish my original Farmers Wife quilt at the same time!)

Some of the pieces in these blocks are really small. And I mean REALLY SMALL!

You cut plenty of 1" squares.

So what have I done to improve my accuracy?

Here are a few of the things that have worked for me:

1. Starch your fabrics before you begin.

You need to starch everything. If some fabrics are starched and others are not you will get in a mess.

Also make sure you starch before you cut. Some fabrics shrink a little when starched. I cut a strip of fabric 1/4" wider than I need for the largest piece in the block and starch it. Leave a while to impregnate and then press it dry. You will be using the fabrics in other blocks so I just store the unused starched pieces in a box ready to use later.

For now I use regular spray starch from the supermarket. I don't really like using aerosols and I'm not prepared to pay the price for Best Press so I've been experimenting with making my own from cornflour, but the recipe still needs a little work.

2. Shorten the stitch length on your sewing machine slightly.

Just a little makes a big difference. The normal setting I use on my Bernina is 2.4. For 6" detailed blocks I reduce it to 2.0, for easier ones I just go down to 2.2.

3. Use leaders and enders

These are small scraps of fabric that you sew before you start sewing the block seam and then again when you've finished. It means you never start a seam with the two ends of the thread dangling free. You don't risk the possibility of the machine "chewing" the first couple of stitches, which in turn will distort the block.

I have a box of 1 1/2" scrap squares beside me and randomly sew 2 together at the start and whenever I would normally cut the thread.

I remember the sewing room at school always had the machines ready threaded with a piece of muslin under each foot with a few stitches sewn. I always wondered why! Now my machine always has one too. The sewn pieces will eventually become a postage stamp quilt for charity.

4. Check you are sewing exactly 1/4" seam

I know this sounds obvious, but it needs to be EXACT. ALL the time.

I really struggled with this for a long time.

My 1/4" was precise enough for large scale blocks, but not for these (and the dreaded Farmers Wife Sampler!) The normal methods of placing marker tape on the machine bed etc. just didn't work well enough for me. In the end I drew the 1/4" line on the blocks with a pencil, until I could recognise exactly where it was. I only needed to do it for a few blocks. I trained myself not to look too much at the pencil line, but at the foot and it worked!

5. Press your seams open.

This is something I had started doing for a while on all my quilts and it really helps on these blocks, where there are a lot of intersecting seams.

I gently finger press whenever possible. Press is the key word. Don't rub your fingers back and forth. Once the block progresses and seams intersect I use a dry iron, minimally, saving a good press until the block is complete.

6. Pin mindfully

I used to pin too much. I used to pin through the seams to make them match up. I think those pins did as much harm as they did good. They often distorted the seam line.

If no seams need matching I no longer pin on seams as short as these.

Where seams need matching I use this approach. Push a pin vertically into the seams of the 2 layers, checking back and front that they are perfectly aligned. Hold that pin vertical from top to bottom.

Place a second pin to the left just outside the seam allowance, so it is going through just 2 layers (the fewer layers it goes through the less distortion). Place a third pin to the right, just outside the seam allowance.

Remove the upright pin before placing the seam under your machine.

Its also worth investing in some good quality pins that aren't too heavy for the job on hand.

7. Trim up as you go.

Lori tells you at every stage what size the finished segment should be. Measure as you go and trim off even the tiniest bit that might be wonky.

8. Unpick a puckered seam

Now, I might be the only idiot who, when noticing a little pucker used to say, "Oh it'll press out at the end"

Trust me, it won't! If there's a pucker halfway through, it'll still be there at the end, and there will probably be a lot more problems along the way! That's what the unpicker tool is for right?!

These few techniques have really improved the accuracy of my work. It's still not perfect but I'm happy with it.

I post photos regularly on Instagram (link at the top of the right hand side bar), and often have fun styling them according to the block title.

Here are a few of my favourites.